Miller SP-2 Especificações descarregar pdf (Página 35)

PAGE 36 — MQ SP2 SLAB SAW — PARTS & OPERATION MANUAL — REV. #7 (09/08/06)

MQ SP2 SLAB SAW — MAINTENANCE

Battery Maintenance

Mishandling of the battery shortens the service life of the battery

and adds to maintenance cost. When handling the battery do the

following:

Be careful not to let the battery electrolyte come in contact

with your body or clothing.

Always wear

eye protection

and

rubber gloves

, since

the battery contains sulfuric acid which burns skin and eats

through clothing.

Always check the battery terminals periodically to

ensure that they are in good condition.

Use wire brush or sand paper to clean the battery

terminals.

Always check battery for cracks or any other damage.

If white pattern appears inside the battery or paste

has accumulated at the bottom, replace the battery.

If the pump will not be in operation for a long period

of time, store in cool dry place and check the battery

charge level every month to maintain the performance

of the battery.

Check the battery regularly and make sure that each

electrolyte level is to the bottom of the vent well

(Figure 43). If necessary add only distilled water in a

well-ventilated area.

Figure 43. Battery Electrolyte Levels

Wear

safety glasses

face mask

, protective

clothes, and rubber gloves when working with

battery.

WARNINGWARNING

WARNING

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 149 150

Sem comentários

Miller SP-2 Especificações Página 35